Creating a correct balance of temperature throughout the building you work in, you make a prudent step towards both protecting certain materials that require specific conditions and raising staff morale. You simply need to install infrared patio heaters where the temperature is low, and the problem of uneven temperature will be solved!

Why You Need Infrared Patio Heater?

Have you ever thought about the problems caused by uneven temperatures across a workplace? Materials being transported between two areas with the difference of a few degrees can be seriously damaged because of even slight temperature differences. Small defects may lead to the serious problems when fitting materials together. To avoid this problem is easy! Everything that is required is to install infrared patio heaters where it’s needed, and your materials will not buckle and get misshapen.

Benefits Of Infrared Patio Heaters

Installing infrared patio heaters has many benefits. Think about your staff and visitor comfort. They will definitely work with greater enthusiasm if they are provided a stable temperature at their workplaces. Infrared Patio Heaters are able to heat the space within a few minutes. In addition, infrared patio heaters can be easily controlled by the staff, so they will be able to switch it on or off when required, which means that the running cost of space heating will be considerably lower compared to other heating systems such as, for example,  large integrated climate control system.

Infrared Patio Heaters Characteristics

Industrial patio heaters are:

• Lightweight;
• Compatible with either 120 volt, 240 volt, and even 480 volt power supplies;
• Power levels of up to 13.5 kilowatts are available.

Choosing the best design

Infrared patio heaters are available in various designs. You can obtain this device for your home or for your working place. The wide range of designs affords you to find the best one that will perfectly match the environment it’s intended for. You can select from either roof mounted heaters that produce much heat that is directed down into a specific area, or choose portable heaters that are easily to move around the room.

Purchasing an infrared patio heater you opt for both creating convenient environment at your working place and saving your money.

You probably have no intention to build an infrared sauna, but want to find out how these strange devices work… Okay, read on to find out.

Basics

1. Forms. Infrared electric heaters are usually composed of plates or flat, thin sheets. It is very important for the efficiency of electric infrared heater. The radiation is successfully emitted if the infrared heater is tall and really wide. Some electric infrared heaters are made in the form of incoloy rods, however heaters of this kind have small efficiency, because of the small surface area that they cover.
2. Materials. What materials are used to produce electric infrared heaters? The answer is steel, ceramic and carbon fiber. Carbon fiber infrared heaters are the most common, but does it obviously mean they are the best. Emissivity is an essential category that defines the quality of a heater. Emissivity shows how efficient is the material for emitting infrared light. Emissivity of materials ranges from 0 to 1.0. According to the researches ceramic heaters are the best, as they possess highest emissivity value. Ceramic heaters produce really healthy infrared light.
3. 3. Placement of the heating elements. For an infrared sauna to be efficient heating elements should be placed correctly. It is obvious that several heaters produce more even heat, in other words “the blanket of heat” is of better quality. Infrared rays cannot reach objects situated far from the source of infrared light, that’s why it is better to have them closer to feel real warmth. Sauna users should be surrounded by heaters so that they could absorb the heat from all directions.
4. Infrared sauna vs. traditional sauna. How do traditional saunas work? There is a box in the sauna that is filled with hot rocks or coals. These rocks or coal reach surface temperatures of up to 180 to 220 degrees F. For a traditional sauna to operate at full blast, it needs some thirty-ninety minute warm up. In comparison with infrared saunas traditional saunas are much difficult to handle. Electric infrared heaters heat objects and not air. It makes infrared sauna more efficient and quicker. Surface temperature of infrared heaters is between 110 – 140 degrees F and warm-up duration is 20 minutes. Shorter warm-up period and lower surface temperatures make infrared electric heaters more cost-efficient (by some 30%-50%)

Heating elements. It is as clear as a day that infrared heater elements bring about changes in the sauna look. As they work in a different way compared with traditional ones, saunas should be constructed in accordance with the peculiarities of their operation. It is very important for electric infrared heaters efficiency.