Regarding the size of the area, it is important to point out that Dayton electric heaters can work efficiently in the area up to 500 sq ft. The heating efficiency is 17,000 BTUs.

You can place your Dayton infrared heater in the wall and it will spread heat in four directions: up, down, left, right. Dayton infrared heaters come with bracings, so it won’t be the problem to install them and, what is more, the speed of heating will impress you. Dayton electric infrared heaters have the capacity of heating from 40 to 85 degrees F.

What are the most important benefits of any heaters? Doubtlessly, they are energy efficiency and safety. These benefits are to be considered each time you buy a heater.

Dayton electric infrared heaters are designed to automatically turn off when the heaters start to overheat. The unit also has an internal thermostat. As the heaters are based on the electricity, there are no worries connected with fuel expenses and risks. It is more pleasant to plug the Dayton infrared heater in and avoid dealing with propane, isn’t it?

Dayton infrared heaters are sure to meet your needs and any cold area with bad insulation will be sufficiently heated. Great safety level of the Dayton heaters are unquestionably a benefit. Shops, garages and warehouses heated with Dayton infrared heaters never lacked the comfort of the pleasant temperature.

So compare infrared heaters with traditional heaters with a conduction based heating source, can’t you tell the difference so far?

Although different technologies are applied in traditional and infrared heaters, and it probably doesn’t make much sense to compare them, you still should know what benefits make best infrared heaters advantageous. Best infrared heaters not only heat the area, the also applicable for heat therapy. Based on the wave length (near-, mid-, and far-) infrared heaters determine beneficial therapeutic effect, with far-infrared heaters being the most effective.

Why far infrared is so beneficial?

The thing is that far-infrared has similar resonance with water, and it enables the water molecules in the body and in the air to transform radiant energy into thermal.

Traditional heaters are less effective and have no useful effect on your health. Traditional heaters burn oxygen and the heat is felt only when the air is sufficiently heated. The heating of conventional heaters being indirect, they are inferior to best infrared heaters.

CZ infrared heaters heat the area in no time, once switched on the heat is already felt. Infrared heaters consume less energy as their operation is direct. They burn no air, so don’t make the humidity level lower.

The Benefits of Purchasing an Infrared Heater

Infrared heater can be a great addition to your house heating system. It is very efficient, since it warms up the objects in the room directly. The principle of its work is very similar to the way sun warms us on a bright day.

Most heaters work in a different way. They emit warmth and in such a way heat up the air in the room. So it takes such heaters a great deal of time to warm up the room. Moreover, once they are switched off, the air becomes cold again. So such heaters are only efficacious when work without ‘cooling-off time’.  This creates large energy expenditures. Infrared heaters don’t heat up the air, they heat up the objects. So, people in the room are warmed up directly by the heater, not by the air. This is much easier and energy efficient.  You won’t have to switch an infrared heater on in advance, because once it is switched, you feel the warmth immediately. That’s why these heaters are very cost-effective and beneficial for your budget. They save energy and they save your money.

Heating up the objects directly, infrared heaters don’t make the air in the room dry, which lowers the risk of respiratory diseases.

Infrared heaters are a bit more expensive than ordinary oil heaters, but think of all the benefits they give. These heaters are very efficient, so you will save in the long run.

Safety

Infrared heaters are one of the safest heating units available. Most modern infrared heaters are equipped with a protective sheath to cover the heating elements. The cover is usually made of metal such as aluminum, stainless steel, copper, brass or iron. There’s no risk of blowing curtains becoming inflamed. Like with most of other house technique and electronic units, kids are not allowed to play with infrared heaters.

Types of Infrared Heaters and the Source of Fuel

Infrared heaters go in various types:

• Metal-sheathed tubular heaters
• Gas fired catalytic
• Ceramic emitters
• Quartz tubes
• Quartz lamps
• Flat-faced panels

So there are a number of options available to find the one right for you.
Also the source of fuel can be different:

• electricity
• natural gas
• propane

Further Saving
Using an infrared heater is a great way to lower your electricity bills. There are even more steps you can make to save electricity:

• Check for drafts and increase the insulation.
• When winter comes, make sure your windows are protected.
• Check thermostats and install timers for your central heating.

So, a simple infrared heater and your initiative can lower your bills and, which is also very important, make you more environmentally-friendly.

To start with, it is necessarily that you know what infrared rays are and how they are divided. The ray if light which is not seen with our eyes, but still influencing our bodies is infrared ray. Infrared rays, if we speak of wavelength on what is known as the electromagnetic spectrum, are long wave rays. However, with the help of scientific methods, which are, unfortunately, cannot be applied by all individuals on daily basis, the infrared light can be subdivided into three types: near infrared, mid infrared, and far infrared. Infrared rays are somewhat similar to sunlight (however, there is no harmful action of UV rays).

Far infrared radiation is the most efficient or it better to say the most useful for our health. They are of the shortest wavelength and are best to be used in infrared saunas.

Traditional saunas operation is based on heating the air (which inevitably changes its humidity level and chemistry) and then heating the skin of the person inside the sauna. This technology, to put it mildly, isn’t state-of-art one. When far infrared heaters are used there is no air heating, because there is no need in it. Far infrared heaters work directly on your body.

In addition to far infrared heaters being efficient and cost-effective, there is another advantage that is very important when it comes to saunas: they work at a lower surface temperature than traditional ones.

Far infrared heaters can be plunged into a standard outlet. But if you think of buying larger models you should keep in mind that they require a special dedicated 15 to 20 amp plug.  Make sure you have everything needed for a far infrared heater before buying one.

Two main types of materials used in constructing far infrared heating elements are ceramic and carbon fibers.  The ability of materials to produce infrared radiation is the most important factor for choosing the material. The ability to produce infrared radiation is called emissivity. Ceramic heaters are the best from the point of view of emissivity. What is more, heating elements made of ceramic are the only heating elements that are capable to emit far infrared rays. Others can emit only near and mid infrared radiation.

Far infrared heaters look quite different from the traditional ones used in saunas. They look like flat and thin plates or sheets. The difference in the look is based on the principle of operation. Infrared radiation requires a large surface area in order that far infrared heater work efficiently. The bigger these plates or sheets are the better you sauna is.

Note, that there are heaters on the market that come in the form of incoloy rods instead of plates. Such heaters cannot be considered an option for building a sauna as their small surface area will compromise their ability to radiate infrared efficiently.

The two models show good performance, they are efficient and of proper quality. However, they are different and the reason of finding what exactly is different is to understand which one is the most appropriate in given circumstances.

DIFFERENCIES

• In respect of operating life time the Comfort Zone Infrared Heaters are virtually unsurpassable. The state-of-art infrared heating technology enables manufacturers to increase operating life time significantly. In comparison with EdenPure Infrared Heaters operating only 5,000 hours before a replacement could be necessary, Comfort Zone heaters can operate four times longer (20,000 hours).
• The Comfort Zone Infrared Heaters are better in heat diffusion. The newly created heat diffuser of stainless steel shows the capacity that is 14% more efficient.
• As for the heat itself the Comfort Zone Infrared Heaters provide healthier heat. Healthier in respect of heat means causing no changes in humidity lever and chemical balance of the air. The Comfort Zone Heaters produce pleasant heat covering the whole area as a “blanket”. It is necessary to mention that the majority of heaters emit more or less harmful byproducts and create uncomfortable atmosphere in the area of operation.
• An important part that enables infrared heater to defuse heat an internal fan. Comfort Zone Infrared Heaters use a Dual DC fan system considered much quieter than others. You are likely to pay attention to it especially if you want to have one at home.
• It probably has come evident that the prices for the Comfort Zone Heaters and EdenPure Heaters are different, with the Comfort Zone Infrared Heaters being more expensive. The least expensive models of both units share a similar price tag of 300-350 dollars. The highest prices for the Comfort Zone heaters and EdenPure heaters range from 400-500 dollars and 300-400 dollars respectively.

SIMILARITIES

• The type of heat exchanges is the same for both units. They both use solid copper heater exchangers increasing the absorption of infrared heat. This copper exchanger converts the infrared waves into a bandwidth of 9-10 microns through a process of copper ionization. The bandwidth is the most appropriate level for maximum heat absorption.
• The Comfort Zone Infrared Heaters and EdenPure ones come with a fully functional remote and thermostat. They use an internal fan to defuse the heat.

Speaking about infrared heaters it is necessary to say that both the Comfort Zone Infrared Heater and EdenPure Infrared Heater are suitable for heating you home. Everything is really fair. The comfort Zone heater is more expensive, but its functions are wider and more efficiently fulfilled. You need to be a cool costumer to buy the heater you need. However, be as much aware as you can these heaters must be of the best quality.